Teflon (PTFE)
The most chemical and extreme heat-resistant plastic. When no other material holds up, Teflon provides the solution.
What is Teflon?
Technical properties of the material
Total chemical resistance
Resists virtually all acids, bases, and solvents.
High working temperature
Up to 260°C in continuous use (peaks up to 300°C).
Lowest coefficient of friction
μ ≈ 0.04, the lowest of all plastics.
Extreme non-stick properties
No material adheres to PTFE.
Excellent electrical insulator
Even at high frequencies and high voltage.
Does not absorb moisture
Does not degrade in humid or corrosive environments.
Biologically inert
Suitable for medical and food use.
Extreme thermal range
Operates from –200°C to +260°C.
Main technical data
Main material properties according to international standards:
| Density (g/cm³) | 2.14–2.20 ISO 1183 |
|---|---|
| Tensile strength (MPa) | 20–35 ISO 527 |
| Elastic modulus (MPa) | 400–600 ISO 527 |
| Elongation at break (%) | 200–400 ISO 527 |
| Continuous working temperature (°C) | 260 — |
| Minimum use temperature (°C) | –200 — |
| Coefficient of friction (μ) | 0.04–0.10 — |
| Dielectric strength (kV/mm) | 20 IEC 60243 |
| Moisture absorption (%) | 0.01 ISO 62 |
Sectors where it is most used
- Chemical and petrochemical industry.
- Pharmaceuticals and biotechnology.
- Food and food processing.
- Aeronautics and aerospace.
- Electronics and electrical industry.
Formats and supply
We supply Teflon in the following standard formats, with the possibility of custom cutting and machining:
PTFE Teflon sheets
Thicknesses from 1 to 50 mm. Standard formats 300×300 mm and 1200×1200 mm. Color: natural white.
PTFE round rods
Diameters from 5 to 300 mm. Standard lengths from 100 to 1000 mm.
Teflon tubes
Outer diameters from 4 mm. Lengths and thicknesses according to requirements.
CNC machined parts
Manufacturing from technical drawings or physical samples.
Common Teflon applications
Due to its unique properties, PTFE is used in environments with high chemical and thermal demands.
Related materials
Frequently asked questions
PTFE resists virtually all known acids, including hydrofluoric acid and aqua regia. Only elemental fluorine and certain molten alkali metals will attack it.
Yes, although it requires specific tools and parameters due to its softness and tendency for cold flow. At Ferplast, we have experience in PTFE machining with tight tolerances.
Yes. PTFE is biologically inert and is approved by the FDA and European regulations for food contact.
Virgin PTFE is the standard. Filled grades (with glass fiber, graphite, or bronze) improve mechanical strength, thermal conductivity, or dimensional stability.
PTFE has a certain degree of flexibility greater than other rigid plastics, but it is not an elastic material. Its low rigidity can be a limitation for parts requiring high dimensional precision.
What those who already trust Ferplast say
We needed gaskets for a reactor with concentrated sulfuric acid. Only Ferplast's PTFE met the requirements. 48h delivery and complete documentation.
The Teflon guides that Ferplast machines for our dosing equipment work perfectly without lubricant. Huge maintenance savings.
Why choose Plásticos Ferplast?
Personalized service
We handle each project uniquely, adapting to the exact needs of each client.
Specialized advice
Over 70 years of experience enable us to recommend the optimal material and process for each application.
Minimum delivery times
We manufacture and supply in the shortest time possible, with express service available in 24h.
Maximum precision
State-of-the-art CNC technology for precise parts and impeccable finishes.